Unlocking the skill of changing golf shaft adapters can significantly broaden the horizons for golfers, enabling them to seamlessly switch between shafts and heads based on their preferences.
Fortunately, the process of changing golf shaft adapters is relatively straightforward, offering the flexibility to experiment with diverse shafts in different heads. This transformation has proven to be a game-changer, especially when encountering enticing sales on preferred shafts with mismatched adapters.
In this guide, we will walk you through a step-by-step process on how to change a golf shaft adapter, delving into essential tools, cleaning techniques and the installation of the new adapter, providing an accessible resource for golfers seeking budget-friendly ways to explore and experiment with new shafts and clubs.
Tools You Need:
Bench vise –
Amazon Bench Vise under $25 Shaft puller –
Value Shaft Extractor ToolDrill with wire brush –
6 Piece Wire Brush Set ($9.99)Epoxy and sticks –
Epoxy Supplies from Golfworks.caTape or paper for mixing/cleaning epoxySandpaper (X grit)Heat gun –
Amazon Heat GunGlovesNew adapter (also called loft sleeve or adapter sleeve)Optional: OEM adapter saver kit –
5 Piece SetOptional: Ferrules
Time To Complete
This is not a process to rush. Allocate adequate time for a proper job, allowing the epoxy to set as per instructions. The process should take around 20 minutes but most epoxy mixes should sit for a minimum of 30 minutes before use with many requiring 24 hours to fully cure. Read all epoxy instructions before starting.
Step 1: Set Up Your Workstation
Similar to regripping a golf club, take the time to properly set up your workstation. Have epoxy bottles, tape, sandpaper and a drill with a wire brush ready. Ensure the heat gun is plugged in and ready to go.